Cisco Chapter 1 Exam Answers
Search Results:
- Fill in the blank. The acronym byod refers to the policy that allows employees to use their personal devices in the business office to access the network and other resources. Match the description to the form of network communication. Not all...
- Dialup telephone is much slower than either DSL or cable, but is the least expensive option for home users because it can use any telephone line and a simple modem. Satellite requires a clear line of sight and is affected by trees and other...
- What are two functions of intermediary devices on a network? Choose two. They are the primary source and providers of information and services to end devices. They form the interface between the human network and the underlying communication network. They direct data along alternate pathways when there is a link failure. They run applications that support collaboration for business.
- They filter the flow of data, based on security settings. Fill in the blank. Which description correctly defines a converged network? Match each characteristic to its corresponding internet conectivity type. Match the form of network communication with its description. Which statement describes a characteristic of cloud computing? A business can connect directly to the Internet without the use of an ISP.
- Devices can connect to the Internet through existing electrical wiring. Investment in new infrastructure is required in order to access the cloud. Applications can be accessed over the Internet through a subscription. Which two Internet connection options do not require that physical cables be run to the building?
CCNA 3 (v5.0.3 + V6.0) Chapter 1 Exam Answers 2021 – 100% Full
Which statement describes cyberwarfare? Cyberwarfare is an attack carried out by a group of script kiddies. It is simulation software for Air Force pilots that allows them to practice under a simulated war scenario. It is a series of personal protective equipment developed for soldiers involved in nuclear war. It is Internet-based conflict that involves the penetration of information systems of other nations. A group of environmentalists launch a denial of service attack against an oil company that is responsible for a large oil spill. A teenager breaks into the web server of a local newspaper and posts a picture of a favorite cartoon character.CCNA 1 (v5.1 + V6.0) Chapter 1 Exam Answers For Explore The Network
A country tries to steal defense secrets from another country by infiltrating government networks. Criminals use the Internet to attempt to steal money from a banking company. What is the motivation of a white hat attacker? Match the type of cyber attackers to the description. Not all options are used. Choose three.CCNA 1 (v5.1 + V6.0) Chapter 11 Exam Answers 2021 – 100% Full
Which design feature will limit the size of a failure domain in an enterprise network? Question A network administrator is planning redundant devices and cabling in a switched network to support high availability. Which benefit will implementing the Spanning Tree Protocol provide to this design? Multiple physical interfaces can be combined into a single EtherChannel interface. Redundant paths can be available without causing logical Layer 2 loops. Network access can be expanded to support both wired and wireless devices. Faster convergence is available for advanced routing protocols. Question What are two benefits of extending access layer connectivity to users through a wireless medium? Choose two. Question Which two features of enterprise class equipment assists an enterprise network in maintaining- Cisco CCNA 1 v7. A new network administrator has been asked to enter a banner message on a Cisco device. What is the fastest way a network administrator could test whether the banner is properly configured? Power cycle the device. The following are the questions exam answers. Guarantee Passed. CCNA 1 v6. In this simulation, take your test, get your score and share with others! ITE v7. IT Essentials 7. We have many expert to verify the answers before we have published. Tell us your rating! Comparte tus Please share this to your friends. Thank you for you sharing and participation with us.
- Good Luck for your exam. Which information is used by routers to forward a data packet toward its destination? A computer has to send a packet to a destination host in the same LAN. How will the packet be sent?
- Fill in the blank. What are two functions of intermediary devices on a network? Choose two. They are the primary source and providers of information and services to end devices. They run applications that support collaboration for business. They form the interface between the human network and the underlying communication network. They direct data along alternate pathways when there is a link failure. Match the form of network communication with its description. Not all options are used. Match each characteristic to its corresponding internet conectivity type. Not all options are used Place the options in the following order: — high bandwidth connection that runs over telephone line — typically has very low bandwidth — not suited for heavily wooded areas — uses coaxial cable as a medium What is the Internet?
- It is a network based on Ethernet technology. It provides network access for mobile devices. It provides connections through interconnected global networks. Match the definition to the security goal. What type of network must a home user access in order to do online shopping?
- Which two statements correctly describe the concepts of administrative distance and metric? Choose two. Administrative distance refers to the trustworthiness of a particular route. A router first installs routes with higher administrative distances. The value of the administrative distance cannot be altered by the network administrator. Routes with the smallest metric to a destination indicate the best path. The metric is always determined based on hop count. The metric varies depending on which Layer 3 protocol is being routed. Explanation: A metric is calculated by a routing protocol and is used to determine the best path smallest metric value to a remote network. Administrative distance AD is used when a router has two or more routes to a remote destination that were learned from different sources. The source with the lowest AD is installed in the routing table. Consider the following routing table entry for R1: D It is the interface on R1 used to send data that is destined for It is the interface on the final destination router that is directly connected to the It is the interface on the next-hop router when the destination IP address is on the Refer to the exhibit.
CCNA 1 V5 Introduction To Networks Chapter 1 Exam Answers 2014
A network administrator issues the show ipv6 route command on R1. What two conclusions can be drawn from the routing table? It does not know any routes to remote networks. However, when the administrator issues the command show ip route, the routing table does not show the directly connected network. What is the possible cause of the problem? The configuration needs to be saved first.CCNA 1 (v5.1 + V6.0) Chapter 1 Exam Answers 2021 – 100% Full
No packets with a destination network of The subnet mask is incorrect for the IPv4 address. Explanation: A directly connected network will be added to the routing table when these three conditions are met: 1 the interface is configured with a valid IP address; 2 it is activated with no shutdown command; and 3 it receives a carrier signal from another device that is connected to the interface. An incorrect subnet mask for an IPv4 address will not prevent its appearance in the routing table, although the error may prevent successful communications. A network administrator configures a router by the command ip route 0.CCNA 3 (v5.0.3 + V6.0) Chapter 1 Exam Answers For Introduction To Scaling Networks
What is the purpose of this command? When the router receives a packet and does not have a specific route toward the destination, it forwards the packet to the next hop indicated in the default route. A route created with the ip route command is a static route, not a dynamic route. What are two common types of static routes in routing tables? Choose two a default static route a built-in static route by IOS a static route to a specific network a static route shared between two neighboring routers a static route converted from a route that is learned through a dynamic routing protocol Explanation: There are two common types of static routes in a routing table, namely, a static route to a specific network and a default static route.- A static route configured on a router can be distributed by the router to other neighboring routers. However, the distributed static route will be a little different in the routing table on neighboring routers. What is the effect of configuring the ipv6 unicast-routing command on a router? Use of this command also assigns the router to the all-routers multicast group. Match the description with the routing table entries. Not all options are used.
- What route would have the lowest administrative distance? Which two statements correctly describe the concepts of administrative distance and metric? Choose two. Administrative distance refers to the trustworthiness of a particular route. The value of the administrative distance cannot be altered by the network administrator.
- Routes with the smallest metric to a destination indicate the best path. The metric varies depending on which Layer 3 protocol is being routed. Consider the following routing table entry for R1: D It is the interface on R1 used to send data that is destined for It is the interface on the final destination router that is directly connected to the It is the interface on the next-hop router when the destination IP address is on the Refer to the exhibit. A network administrator issues the show ipv6 route command on R1. What two conclusions can be drawn from the routing table? R1 does not know a route to any remote networks.
- However, when the administrator issues the command show ip route, the routing table does not show the directly connected network. What is the possible cause of the problem? No packets with a destination network of The subnet mask is incorrect for the IPv4 address. A network administrator configures a router by the command ip route 0. What is the purpose of this command? What are two common types of static routes in routing tables? What is the effect of configuring the ipv6 unicast-routing command on a router? Match the description with the routing table entries. Not all options are used.
- Application filtering can permit or deny access based on port number. What is the purpose of the network security authentication function? Authentication requires users to prove who they are. Authorization determines which resources the user can access. Accounting keeps track of the actions of the user. A network administrator is issuing the login block-for attempts 2 within 30 command on a router. Which threat is the network administrator trying to prevent? A device inspecting the traffic on a link has nothing to do with the router.
- The router configuration cannot prevent unauthorized access to the equipment room. A worm would not attempt to access the router to propagate to another part of the network. Which two steps are required before SSH can be enabled on a Cisco router? Choose two. Give the router a host name and domain name. Create a banner that will be displayed to users when they connect. Generate a set of secret keys to be used for encryption and decryption. Set up an authentication server to handle incoming connection requests. Enable SSH on the physical interfaces where the incoming connection requests will be received. First, set the host name and domain name. Second, generate a set of RSA keys to be used for encrypting and decrypting the traffic. Third, create the user IDs and passwords of the users who will be connecting. Lastly, enable SSH on the vty lines on the router. SSH does not need to be set up on any physical interfaces, nor does an external authentication server need to be used.
- While it is a good idea to configure a banner to display legal information for connecting users, it is not required to enable SSH. Refer to the exhibit. What does this indicate to the network administrator? Connectivity between H1 and H3 is fine. H3 is not connected properly to the network. Something is causing interference between H1 and R1. Performance between the networks is within expected parameters. Something is causing a time delay between the networks. Explain: Ping round trip time statistics are shown in milliseconds. The larger the number the more delay. A baseline is critical in times of slow performance. By looking at the documentation for the performance when the network is performing fine and comparing it to information when there is a problem, a network administrator can resolve problems faster. When should an administrator establish a network baseline? This allows the administrator to take note when any deviance from the established norm occurs in the network.
- An administrator is trying to troubleshoot connectivity between PC1 and PC2 and uses the tracert command from PC1 to do it. Based on the displayed output, where should the administrator begin troubleshooting?
- Installing antivirus software, antimalware software, and implementing a firewall will usually be the minimum requirements for home networks. Installing a home wireless network will not improve cisco chapter 1 exam answers security, and will require further security actions to be taken. A converged network is capable of delivering voice, video, text, and graphics over the same communication channels. Fill in the blank. The acronym byod refers to the policy that allows employees to use their personal devices in the business office to access the network and other resources. Match the description to the form of network communication. Not all options are used. Cable uses the same coaxial cable that carries television signals into the home to provide Internet access.
CCNA 3 (v + V) Chapter 1 Exam Answers For Introduction To Scaling Networks - Config Router
Dialup telephone is much slower than either DSL or cable, but is the least expensive option for home users because it can use any telephone line and a simple modem. Satellite requires a clear line of sight and is affected by trees and other obstructions. Match the definition to the security goal. A field calculated by the sender is recalculated and verified to be the same by the receiver. Passwords and authorization maintain control over who has access to personal data.CCNA 1 V5 Introduction To Networks Chapter 1 Exam Answers | CCNA En Español
Redundant devices and links attempt to provide Integrity is made possible by requiring validation of the sender, not the destination. VPNs are not the only secure method by which data can be transferred confidentially. Which networking trend involves the use of personal tools and devices for accessing resources on a business or campus network?- Fill in the blank. What are two functions of intermediary devices on a network? Choose two. They are the primary source and providers of information and services to end devices. They run applications that support collaboration for business. They form the interface between the human network and the underlying cisci network. They direct andwers along alternate cisco chapter 1 exam answers when there is a link failure.
Comments
Post a Comment